Addexbio Cells Laboratories manufactures the addex bio reagents distributed by Genprice. The Addex Bio reagent is RUO (Research Use Only) to test human serum or cell culture lab samples. To purchase these products, for the MSDS, Data Sheet, protocol, storage conditions/temperature or for the concentration, please contact Addexbio Cells. Other Addex products are available in stock. Specificity: Addex Category: Bio
JBS True Blue |
|
MiTeGen |
300 µl |
EUR 16 |
|
Description: JBS True Blue |
BIO |
|
ABM |
10.0 mg |
EUR 430 |
|
Description: 6-bromo-3-[(3E)-1,3-dihydro-3-(hydroxyimino)-2H-indol-2-ylidene]-1,3-dihydro-(3Z)-2H-indol-2-one |
Serum / Plasma information
MultiBox™, 2 compartments, 85 x 85 x 30mm each (311/32 x 311/32 x 13/16 in.), for Novex Mini (8x8cm), Bio-Rad Mini (7x8cm) and others, 6/pk |
|
B1212 |
MTC Bio |
6/pack |
EUR 100.08 |
|
Description: Western Blot Boxes |
AddexBio Cryopreservation Medium |
|
C0002-01-20mL |
Addexbio |
RT vial |
EUR 25 |
AddexBio Cryopreservation Medium |
|
C0002-20mL |
Addexbio |
RT vial |
EUR 124.8 |
FBS Gold ADD (FBS Shorty®s, 10 x 50 ml) |
|
FBS.ADD.0500.S |
Bio&SELL |
10x 50 mL |
Ask for price |
|
Description: Our FBS Shorty®s are convenient, ready-to-use aliquots (10 x 50 ml) of fetal bovine serum (FBS) . FBS Shorty®s are designed to relieve you of the tedious and time-consuming task of FBS aliquoting, so you can focus on your research. We take over the aliquoting of your chosen FBS batch and you can easily add the FBS to your desired medium in just one step.This saves time, energy and resources and reduces the possibility of contamination to a minimum. On request, we can offer you all our sera pre-aliquoted (as FBS Shorty®s) . This FBS Shorty® batch contains FBS Gold ADD.For our FBS Gold ADD, we have addedbovine additivesto FBS. By adding these additives, FBS Gold ADD is characterized by reduced batch variations compared to standard FBS. The added additives also promote the stability and therefore the vitality of your cells. Less work- practical ready-to-use FBS aliquots (10 x 50 ml) Less contamination- controlled aliquoting in cleanroomsMore convenience- ready-to-use cell culture medium in just one step Good to know In order to create in vivo conditions for in vitro cell culture, serum is usually added to the cell culture medium. Serum serves the cells as a source of growth factors, lipids, hormones and minerals. Fetal bovine serum (FBS) is particularly rich in growth factors and contains few antibodies that could interfere with cell cultivation. This unique composition makes FBS one of the most important supplements for cell proliferation in in-vitro cell culture. By default, 10% FBS is added to cell culture media. To avoid repeated freeze-thaw cycles, FBS is generally aliquoted in a suitable volume. This is laborious, time-consuming and increases the risk of contamination. Save yourself the trouble of aliquoting and leave it to us! |
FBS SUPERIOR stabil - est only once - Each additional lot works like the previous one |
|
FBS.S 0613 |
Bio&SELL |
100 mL |
Ask for price |
FBS SUPERIOR stabil - est only once - Each additional lot works like the previous one |
|
FBS.S 0615 |
Bio&SELL |
500 mL |
Ask for price |
Hepatitis C Virus NS3 (1450-1643), Biotin Labeled, (Recombinant) |
|
22060151-1 |
Bio-WORLD |
100 µg |
EUR 547.75 |
BioColl® density 1.077 g/mL - The good BioColl® |
|
BS.L 6113 |
Bio&SELL |
100 mL |
Ask for price |
BioColl® density 1.077 g/mL - The good BioColl® |
|
BS.L 6115 |
Bio&SELL |
500 mL |
Ask for price |
BioColl® density 1.077 g/mL - The good BioColl® |
|
BS.L 6117 |
Bio&SELL |
1000 mL |
Ask for price |
Biotin 0.4mM |
|
40120733-1 |
Bio-WORLD |
10 mL |
EUR 41.52 |
|
|
Biotin 0.4mM |
|
40120733-2 |
Bio-WORLD |
50 mL |
EUR 99.88 |
|
|
Biotin 0.4mM |
|
40120733-3 |
Bio-WORLD |
100 mL |
EUR 142.53 |
|
|
Biotin-NHS |
|
41400012-1 |
Bio-WORLD |
100 mg |
EUR 110.81 |
|
|
Biotin-NHS LC |
|
41400016-1 |
Bio-WORLD |
100 mg |
EUR 171.09 |
|
|
BioFectin™ |
|
40220012-1 |
Bio-WORLD |
0.5 mL |
EUR 105.44 |
BioFectin™ |
|
40220012-2 |
Bio-WORLD |
1 mL |
EUR 213.05 |
Biotin-HPDP |
|
40160007-1 |
Bio-WORLD |
50 mg |
EUR 288.71 |
Biotin-HPDP |
|
40160007-2 |
Bio-WORLD |
250 mg |
EUR 1148.9 |
BioColl® - mouse, 100 ml |
|
BS.L6119 |
Bio&SELL |
100 mL |
Ask for price |
|
Description: Centrifugation medium made from polysucrose; density: 1.086 g/ml; for the isolation of lymphocytesProduct descriptionOur BioColl® separation solution contains neutral, highly cross-linked polysucrose with an average molecular weight of 400,000 Da. This hydrophilic polymer can be used to prepare aqueous solutions with different densities (up to about 1.2 g/ml), which are used for the isolation of cells or subcellular particles. The appropriate density of the BioColl® separation solution is selected depending on the particle type. A density of 1.086 g/ml is ideal for the isolation of murine lymphocytes. For optimal pH and osmolality values, the BioColl® separation solution should be adjusted with an acid (preferably amidotrizoic acid (ATS) ) and sodium hydroxide solution.PropertiesDensity: 1.086 g/mlFor the isolation of murine lymphocytesAqueous solution of highly cross-linked polysucroseGood to knowCells (e.g. PBMCs) are isolated by so-called density gradient centrifugation. This physical process is based on the separation of macromolecules according to their sedimentation properties (size, weight) in a density gradient. The isolation of cells or subcellular particles is often the first step in diagnostic investigations, gene expression studies or in the production of antibodies.StorageStore this product at +2 to RT.For a complete list of the appropriate density of our BioColl® separation solution for your cell type, see FAQ!BioColl® is a registered trademark of Bio&SELL GmbH. |
BioColl® - mouse, 500 ml |
|
BS.L6121 |
Bio&SELL |
500 mL |
Ask for price |
|
Description: Centrifugation medium made from polysucrose; density: 1.086 g/ml; for the isolation of lymphocytesProduct descriptionOur BioColl® separation solution contains neutral, highly cross-linked polysucrose with an average molecular weight of 400,000 Da. This hydrophilic polymer can be used to prepare aqueous solutions with different densities (up to about 1.2 g/ml), which are used for the isolation of cells or subcellular particles. The appropriate density of the BioColl® separation solution is selected depending on the particle type. A density of 1.086 g/ml is ideal for the isolation of murine lymphocytes. For optimal pH and osmolality values, the BioColl® separation solution should be adjusted with an acid (preferably amidotrizoic acid (ATS) ) and sodium hydroxide solution.PropertiesDensity: 1.086 g/mlFor the isolation of murine lymphocytesAqueous solution of highly cross-linked polysucroseGood to knowCells (e.g. PBMCs) are isolated by so-called density gradient centrifugation. This physical process is based on the separation of macromolecules according to their sedimentation properties (size, weight) in a density gradient. The isolation of cells or subcellular particles is often the first step in diagnostic investigations, gene expression studies or in the production of antibodies. |
Sulfo-NHS SS Biotin |
|
41900164-1 |
Bio-WORLD |
100 mg |
Ask for price |
|
|
Tris - Biotech Grade |
|
TB0196 |
Bio Basic |
500g |
EUR 86.1 |
|
|
BioColl® - with 10 mM HEPES, 100 ml |
|
BS.L.6713 |
Bio&SELL |
100 mL |
Ask for price |
|
Description: Centrifugation medium made from polysucrose; density: 1.077 g/ml; for the isolation of lymphocytes; with 10 mM HEPESProduct descriptionOur BioColl® separation solution contains neutral, highly cross-linked polysucrose with an average molecular weight of 400,000 Da. This hydrophilic polymer can be used to prepare aqueous solutions with different densities (up to about 1.2 g/ml), which are used for the isolation of cells or subcellular particles. The appropriate density of the BioColl® separation solution is selected depending on the particle type. A density of 1.077 g/ml is ideal for the isolation of lymphocytes. For optimal pH and osmolality values, the BioColl® separation solution should be adjusted with an acid (preferably amidotrizoic acid (ATS) ) and sodium hydroxide solution.PropertiesDensity: 1.077 g/mlWith 10 mM HEPESFor the isolation of lymphocytesAqueous solution of highly cross-linked polysucroseGood to knowCells (e.g. PBMCs) are isolated by so-called density gradient centrifugation. This physical process is based on the separation of macromolecules according to their sedimentation properties (size, weight) in a density gradient. The isolation of cells or subcellular particles is often the first step in diagnostic investigations, gene expression studies or in the production of antibodies. |
BioColl® - with 10 mM HEPES, 500 ml |
|
BS.L.6715 |
Bio&SELL |
500 mL |
Ask for price |
|
Description: Centrifugation medium made from polysucrose; density: 1.077 g/ml; for the isolation of lymphocytes; with 10 mM HEPESProduct descriptionOur BioColl® separation solution contains neutral, highly cross-linked polysucrose with an average molecular weight of 400,000 Da. This hydrophilic polymer can be used to prepare aqueous solutions with different densities (up to about 1.2 g/ml), which are used for the isolation of cells or subcellular particles. The appropriate density of the BioColl® separation solution is selected depending on the particle type. A density of 1.077 g/ml is ideal for the isolation of lymphocytes. For optimal pH and osmolality values, the BioColl® separation solution should be adjusted with an acid (preferably amidotrizoic acid (ATS) ) and sodium hydroxide solution.PropertiesDensity: 1.077 g/mlWith 10 mM HEPESFor the isolation of lymphocytesAqueous solution of highly cross-linked polysucroseGood to knowCells (e.g. PBMCs) are isolated by so-called density gradient centrifugation. This physical process is based on the separation of macromolecules according to their sedimentation properties (size, weight) in a density gradient. The isolation of cells or subcellular particles is often the first step in diagnostic investigations, gene expression studies or in the production of antibodies. |
BioColl® density 1.1 g/mL |
|
BS.L 6153 |
Bio&SELL |
100 mL |
Ask for price |
BioColl® density 1.1 g/mL |
|
BS.L 6155 |
Bio&SELL |
500 mL |
Ask for price |
Biotin Hydrazide |
|
40200040-1 |
Bio-WORLD |
100 mg |
EUR 150.09 |
|
|